Abstract Biofilm on acrylic resin dental prostheses may cause gingival inflammation. This study evaluated the influence of a silicon dioxide coating layer applied onto acrylic resin on the adhesion of microorganisms. Blocks (5 x 5 x 3 mm) of acrylic resin were evaluated for surface roughness and divided into two groups: control (CG) and coated with silicon dioxide (LG group). The specimens were evaluated by scanning electron microscopy (n = 1) and by contact angle analysis (n = 3). For the in situ study, 20 volunteers wore acrylic palatal devices containing three samples from each group (n = 60) for 2 days. The biofilm formed was quantified by metabolic activity and total biomass using the crystal violet assay. The results were subjected to Bartlett’s normality test and Gamma model with random effect for the response variable (α = 5%). The mean contact angle of the coated group was significantly lower than that of the uncoated group (p < 0.05). The metabolic activity of microorganisms in the biofilm on the blocks treated with coating was significantly lower than that of control blocks (p = 0.02). Regarding the amount of extracellular matrix produced by the microorganisms, there was no difference between the CG and LG group (p = 0.05). The application of a silicon dioxide coating on acrylic resin reduced the activity of the polymicrobial biofilm formed in situ. This coating may be advantageous for patients with conventional complete dentures or implants made of acrylic resin and who have motor difficulties that prevent them from cleaning their prostheses properly.

Abstract This longitudinal study aimed to assess the performance of the Facility-Equator system as mandibular overdenture (MO) retainers from a prosthetic perspective during 2 years of loading and to investigate the oral health-related quality of life (OHRQoL) and whether prosthetic events can affect the OHRQoL. Twenty-four patients (68.1 ± 7.51 years) reported their OHRQoL through the Geriatric Oral Health Assessment Index (GOHAI) and Oral Health Impact Profile (OHIP-EDENT) questionnaires before MO loading and after 1 and 2 years of usage. Prosthetic occurrences were recorded during this period. Data were analyzed using the Wilcoxon test, Mann-Whitney test, and Spearman correlation coefficients. Of the 127 prosthetic events that occurred in the first year, the most frequent events were prosthesis adjustments (16.5%), dislodgement of the Equator attachment (14.17%), and O-ring replacement (11.8%). Eighty-seven prosthetic events were recorded in the second year, the most frequent events being prosthesis adjustments (27.6%), O-ring replacement (20.7%), and recapturing the female matrix (11.5%). All domains of the GOHAI and OHIP-EDENT questionnaires exhibited a significant difference (p < 0.05) between the baseline and 1- and 2-year evaluations, except in the Social Disability and Psychological Discomfort domains (p > 0.05) of OHIP-EDENT after 1 year. Complications related to prosthetic maintenance, such as fracturing of the prosthesis, Equator dislodgement, prosthesis rebasing, and new overdenture confection, affect the OHRQoL (p < 0.05), primarily the Physical Pain and Discomfort domains, especially in the first year of MO loading.

Abstract Here, the prevalence of oral candidiasis and denture stomatitis among diabetic patients compared to healthy ones was summarized through a systematic review with meta-analysis. Medline, Scopus, Web of Science, Lilacs, Cochrane Library, Embase, and the grey literature were searched without restriction, until May 2020. Eligibility criteria were established, data were extracted, and quality assessment was conducted by two trained examiners. Qualitative synthesis was based on the recommendations of Fowkes and Fulton. Two meta-analyses were performed on studies investigating patients with: a) oral candidiasis and b) denture stomatitis. Out of 6034 screened studies, seven were eligible for qualitative and quantitative synthesis; of these, three evaluated oral candidiasis and four evaluated denture stomatitis. Qualitative synthesis showed that the main methodological problems of the studies included sample size, source of controls, matching, and randomization. Diabetic patients had a similar chance of developing oral candidiasis to non-diabetic patients (OR1.40 [0.96; 2.04], p = 0.08, I2 = 94%). However, diabetic patients had a higher chance to present denture stomatitis compared to non-diabetic patients (OR 1.92 [1.42, 2.59] p < 0.0001, I2 = 0%). Therefore, diabetic patients have a higher chance of developing denture stomatitis compared to non-diabetic patients. However, for all analyses, the certainty of the evidence was considered to be very low.

Abstract Acrylic resin has been used in the manufacture of prostheses, however, in the oral cavity, this material starts to retain microorganisms capable of causing gingival inflammation due its porosities. The aim of this study was to evaluate the influence of the use of silicon dioxide as a coating layer applied onto acrylic resin, on the adhesion of Candida albicans (Ca). After the incubation period in Sabouraud Dextrose Broth, a total of 1 ml of the Ca suspension was added to plate wells, each well containing a specimen of acrylic resin. The adhesion ability of Ca on acrylic resin was determined by counting colonies. Three groups (n = 6) of acrylic resin were assessed: with polishing (RP); without polishing (RW); with polishing and coating layer of silicon dioxide (RPC). Ca deposited on the surface of the acrylic resin was also observed using Scanning Electron Microscopy (SEM). Statistical assessment by Kruskal-Wallis and Student-Newman-Keuls Method were done (α = 2%). There was significant difference among the groups. The RPC group showed the lowest growth, with an average of 5.59 Log CFU/cm 2 ; there was a statistically significant difference in relation to group RW, which presented a growth of 6.07 Log CFU/cm 2 and to group RP with 5.91 Log CFU/cm 2 (p < 000.1). SEM images demonstrated that in the RP and RPC group, the surface of the resin had greater regularity, and smaller number of microorganisms. The application of silicon dioxide coating on acrylic resin appears to be a promising alternative, and its use can help in reducing the adhesion of Ca in prostheses.

Abstract Observational studies have indicated that crestal bone level changes at implants are typically associated with clinical signs of inflammation, but still mechanical overload has been described as possible factor leading to hard–tissue deficiencies at implant sites without mucosal inflammation. The aim of this paper was systematically review the literature regarding the possible effect of traumatic occlusal forces on the peri-implant bone levels. Literature search was conducted using PubMed, Scielo and Lilacs, including the following terms: oral OR dental AND implant$ AND (load OR overload OR excessive load OR force$ OR bruxism) AND (bone loss OR bone resorption OR implant failure$). Databases were searched for the past 10 years of publications, including: clinical human studies, either randomized or not, cohort studies, case control studies, case series and animal research. Exclusion criteria were review articles, guidelines and in vitro and in silico (finite element analysis) research, as well as retrospective studies. The PICO questions formulated was: “does traumatic occlusal forces lead to peri-implant bone loss?” The database searches as well as additional hand searching, resulted in 807 potentially relevant titles. After inclusion/exclusion criteria assessment 2 clinical and 4 animal studies were considered relevant to the topic. The included animal studies did not reveal an association between overload and peri-implant bone loss when lower overloads were applied, whereas in the presence of excessive overload it seemed to generate peri-implant bone loss, even in the absence of inflammation. The effect of traumatic occlusal forces in peri-implant bone loss is poorly reported and provides little evidence to support a cause-and-effect relationship in humans, considering the strength of a clinically relevant traumatic occlusal force.

Abstract This randomized clinical trial evaluated the insertion torque (IT), primary, and secondary stability of dental implants with different surface treatments during the osseointegration period. Nineteen patients with bilateral partial edentulism in the posterior mandibular region were randomly allocated to two implant brand groups and received implants with different surface treatments in the opposite site of the arch: Osseotite and Nanotite or SLA and SLActive. During implant placement, the maximum IT was recorded using a surgical motor equipped with a graphical user interface. The implant stability quotient (ISQ) was assessed immediately after the IT, and was measured weekly via resonance frequency analysis during 3 months. The data were analyzed by a one-way ANOVA, the Bonferroni test, paired t tests and Pearson’s correlation coefficient. The IT values were similar (p > 0.05) for all implant types ranging from 43.82 ± 6.50 to 46.84 ± 5.06. All implant types behaved similarly until the 28th day (p > 0.05). Between 35 and 56 days, Osseotite and SLActive showed lower ISQ values (p < 0.001) compared to Nanotite and SLA implants. After 56 days, only Osseotite maintained significantly lower ISQ values than the other implants (p < 0.05). After 91 days the ISQ values were significantly higher than the baseline for all four implant types (p < 0.001). The ISQ and IT values were significantly correlated at the baseline and at the final evaluation for Osseotite, Nanotite, and SLActive implants (p < 0.001). After 91 days, ISQ and IT values were only significantly correlated for the Osseotite implants (p < 0.05). All implants types exhibited acceptable primary and secondary stability.

Abstract: Adhesive procedures have changed the way to restore endodontically treated teeth (ETT). It started with the shift from cast post-and-core to fiber post. The original focus on strength also shifted towards failure modes, revealing that catastrophic failures are still a concern when restoring endodontically-treated teeth even with fiber posts. As an alternative, postless approaches have been proposed in order to improve the chances of repair. The goal of this critical review is to present a survey of the current knowledge on adhesive approaches to restore endodontically treated teeth with and without extensive coronal tissue loss. The preservation of tooth structure of endodontically treated teeth is paramount. Partial versus full coverage of ETT, the role of the ferrule, the post type effect on catastrophic failures and postless alternatives as endocrowns and postless build-ups are reviewed. There is a consensus that the remaining tooth structure plays an important role in ETT survival, although the current literature still is contradictory on the influence of post type on root fractures as well as the benefits of avoiding a post or partially restoring a tooth. More clinical studies should be carried out with the modern postless adhesive alternatives to conventional approaches.

Abstract Zirconia-reinforced lithium silicate (ZLS) is a ceramic that promises to have better mechanical properties than other materials with the same indications as well as improved adaptation and fracture strength. Objective In this study, marginal and internal misfit and fracture load with and without thermal-mechanical aging (TMA) of monolithic ZLS and lithium disilicate (LDS) crowns were evaluated. Material and methods Crowns were milled using a computer-aided design/computer-aided manufacturing system. Marginal gaps (MGs), absolute marginal discrepancy (AMD), axial gaps, and occlusal gaps were measured by X-ray microtomography (n=8). For fracture load testing, crowns were cemented in a universal abutment, and divided into four groups: ZLS without TMA, ZLS with TMA, LDS without TMA, and LDS with TMA (n=10). TMA groups were subjected to 10,000 thermal cycles (5-55°C) and 1,000,000 mechanical cycles (200 N, 3.8 Hz). All groups were subjected to compressive strength testing in a universal testing machine at a crosshead speed of 1 mm/min until failure. Student’s t-test was used to examine misfit, two-way analysis of variance was used to analyze fracture load, and Pearson’s correlation coefficients for misfit and fracture load were calculated (α=0.05). The materials were analyzed according to Weibull distribution, with 95% confidence intervals. Results Average MG (p<0.001) and AMD (p=0.003) values were greater in ZLS than in LDS crowns. TMA did not affect the fracture load of either material. However, fracture loads of ZLS crowns were lower than those of LDS crowns (p<0.001). Fracture load was moderately correlated with MG (r=-0.553) and AMD (r=-0.497). ZLS with TMA was least reliable, according to Weibull probability. Conclusion Within the limitations of this study, ZLS crowns had lower fracture load values and greater marginal misfit than did LDS crowns, although these values were within acceptable limits.

Abstract The aim of this longitudinal observational study was to evaluate the oral health-related quality of life (OHRQoL) following patient rehabilitation with implant-retained mandibular overdentures (IMO) and to identify the contribution of the different domains to OHRQoL. The Oral Health Impact Profile (OHIP-EDENT), Dental Impact on Daily Living (DIDL), and Geriatric Oral Health Assessment Index (GOHAI) questionnaires were completed twice by 25 patients: after 3 months of rehabilitation with complete dentures (CD) and after 3 months of IMO loading using stud abutments. The evaluation after IMO rehabilitation showed significant improvement in three DIDL domains: appearance (p = 0.011), eating and chewing (p = 0.003), and general performance (p = 0.003). The GOHAI results showed significant differences in two domains: psychosocial (p = 0.005) and pain and discomfort (p = 0.0004). The OHIP-EDENT outcomes showed significant improvements in five domains: functional limitation (p = 0.0001), physical pain (p = 0.0002), physical disability (p = 0.0010), and psychological disability and handicap (p = 0.032). The largest observed effect sizes were close to one standard deviation and were observed in the eating and chewing domain (0.93) of the DIDL; the pain and discomfort domain (0.83) of the GOHAI, and the functional limitation (0.89), physical pain (1.02), physical disability (0.84) domains of the OHIP-EDENT. The percentage of satisfied patients increased in all domains. Self-reported OHRQoL of CD wearers was significantly improved after 3 months of treatment with IMO, especially concerning the functional and pain-related aspects.

Abstract This study evaluated the stress behavior around short implants in edentulous atrophic mandibles. Six groups included implants with two diameters regular and wide (4 and 5 mm) and three lengths (5, 7 and 9 mm) as follows: Ci9 (9 x 4 mm), Ci7 (7 x 4 mm), Ci5 (5 x 4 mm), Wi9 (9 x 5 mm), Wi7 (7 x 5 mm) and Wi5 (5 x 5 mm). These groups were compared to the control group CG (11 x 4 mm). The analysis was performed with the photoelastic method (n = 6). Each model comprised 4 implants with the same length and diameter connected by a chromium-cobalt bar that simulates a fixed denture. A 0.15 kg force was applied at the end of the cantilever (15 mm), and the maximum shear stress was recorded around the distal and subsequent implants. The stress values were determined, and the quantitative data (Fringes®) were submitted to statistical analysis with one-way ANOVA and the Dunnett test (p < 0.05). It was observed that the reduction in implant length increased stress values with a significant difference (p < 0.05) between CG Ci7 and Ci5, while the increase in implant diameter reduced the stress values without any differences found between short and long implants. Implants with 5 and 7 mm with regular diameter increased stress levels while short implants with larger diameters experienced similar stress to that of longer implants.

Abstract This study aimed to evaluate the influence of the type of prosthetic abutment associated to different implant connection on bone biomechanical behavior of immediately and delayed loaded implants. Computed tomography-based finite element models comprising a mandible with a single molar implant were created with different types of prosthetic abutment (UCLA or conical), implant connection (external hexagon, EH or internal hexagon, IH), and occlusal loading (axial or oblique), for both immediately and delayed loaded implants. Analysis of variance at 95%CI was used to evaluate the peak maximum principal stress and strain in bone after applying a 100 N occlusal load. The results showed that the type of prosthetic abutment influences bone stress/strain in only immediately loaded implants. Attachment of conical abutments to IH implants exhibited the best biomechanical behavior, with optimal distribution and dissipation of the load in peri-implant bone.

The effect of Candida albicans biofilms and methyl methacrylate (MMA) pretreatment on the bond strength between soft denture liners and polymethyl methacrylate (PMMA) resin was analyzed. Specimens were prepared and randomly divided with respect to PMMA pretreatment, soft liner type (silicone-based or PMMA-based), and presence or absence of a C. albicans biofilm. Samples were composed of a soft denture liner bonded between two PMMA bars. Specimens (n = 10) were incubated to produce a C. albicans biofilm or stored in sterile PBS for 12 days. The tensile bond strength test was performed and failure type was determined using a stereomicroscope. Surface roughness (SR) and scanning electron microscopy (SEM) analysis were performed on denture liners (n = 8). Highest bond strength was observed in samples containing a silicone-based soft liner and stored in PBS, regardless of pretreatment (p < 0.01). Silicone-based specimens mostly underwent adhesive failures, while samples containing PMMA-based liners predominantly underwent cohesive failures. The silicone-based specimens SR decreased after 12 days of biofilm accumulation or PBS storage, while the SR of PMMA-based soft liners increased (p < 0.01). The PMMA-based soft liners surfaces presented sharp valleys and depressions, while silicone-based specimens surfaces exhibited more gentle features. In vitro exposure to C. albicans biofilms reduced the adhesion of denture liners to PMMA resin, and MMA pretreatment is recommended during relining procedures.

The anticaries effect of fluoride (F) toothpaste containing 1100 µg F/g in reducing enamel demineralization is well established, but its effect on dentine has not been extensively studied. Furthermore, it has been shown that toothpaste containing a high F concentration is necessary to remineralize root dentine lesions, suggesting that a 1100 µg F/g concentration might not be high enough to reduce root dentine demineralization, particularly when dentine is subjected to a high cariogenic challenge. Thus, the aim of this pilot study was to evaluate in situ the effect of F toothpaste, at a concentration of 1100 µg F/g, on dentine demineralization. In a crossover and double-blind study, conducted in two phases of 14 days, six volunteers wore a palatal appliance containing four slabs of bovine root dentine whose surface hardness (SH) was previously determined and to which a 10% sucrose solution was applied extra-orally 8×/day. Volunteers used a non-F toothpaste (negative control) or F toothpaste (1100 µg F/g, NaF/SiO2) three times a day. On the 10th and 14th days of each phase, two slabs were collected and SH was determined again. Dentine demineralization was assessed as percentage of SH loss (%SHL). The effect of toothpaste was significant, showing lower %SHL for the F toothpaste group (42.0 ± 9.7) compared to the non-F group (62.0 ± 6.4; p < 0.0001), but the effect of time was not significant (p > 0.05). This pilot study suggests that F toothpaste at 1100 µg F/g is able to decrease dentine caries even under a high cariogenic challenge of biofilm accumulation and sugar exposure.

This study evaluated the biomechanical influence of apical bone anchorage on a single subcrestal dental implant using three-dimensional finite element analysis (FEA). Four different bone anchorage designs were simulated on a posterior maxillary segment using one implant with platform switching and internal Morse taper connection as follows: 2 mm subcrestal placement with (SW) or without (SO) the implant apex engaged into the cortical bone or position at bone level with anchorage only in the crestal cortical (BO) bone or with bicortical fixation (BW). Each implant received a premolar crown, and all models were loaded with 200 N to simulate centric and eccentric occlusion. The peak tensile and compressive stress and strain were calculated at the crestal cortical, trabecular, and apical cortical bone. The vertical and horizontal implant displacements were measured at the platform level. FEA indicated that subcrestal placement (SW and SO) created lower stress and strain in the crestal cortical bone compared with crestal placement (BO and BW models). The SW model exhibited lesser vertical and horizontal implant micromovement compared with the SO and BO models under eccentric loading; however, stress and strain were higher in the apical cortical bone. The BW model exhibited the lowest implant displacement. These results indicate that subcrestal placement decreases the stress in the crestal cortical bone of dental implants, regardless of apical anchorage; however, apical cortical anchorage can be effective in limiting implant displacement. Further studies are required to evaluate the effects of possible remodeling around the apex on the success of subcrestal implants.

OBJECTIVE: The aim of this study was to evaluate whether vertical facial patterns influence maximal occlusal force (MOF), masticatory muscle electromyographic (EMG) activity, and medial mandibular flexure (MMF). MATERIAL AND METHODS: Seventy-eight dentate subjects were divided into 3 groups by Ricketts's analysis: brachyfacial, mesofacial and dolychofacial. Maximum occlusal force in the molar region was bilaterally measured with a force transducer. The electromyographic activities of the masseter and anterior temporal muscles were recorded during maximal voluntary clenching. Medial mandibular flexure was calculated by subtracting the intermolar distance of maximum opening or protrusion from the distance in the rest position. The data were analyzed using ANOVA followed by Tukey's HSD test. The significance level was set at 5%. RESULTS: Data on maximum occlusal force showed that shorter faces had higher occlusal forces (P<0.0001). Brachyfacial subjects presented higher levels of masseter electromyographic activity and medial mandibular flexure, followed by the mesofacial and dolychofacial groups. Additionally, dolychofacial subjects showed significantly lower electromyographic temporalis activities (P<0.05). CONCLUSION: Within the limitations of the study, it may be concluded that maximum occlusal force, masticatory muscle activity and medial mandibular flexure were influenced by the vertical facial pattern.